Powkiddy is rumored to have begun testing the RGB20 Pro, according to Jdewitz, a known Powkiddy source and photographer for @retrohandheldcollection on Instagram. It differs from the RGB20 in size, and appearance, and has a few unique features not seen in other retro handhelds.
The RGB line of devices from Powkiddy spans across multiple different chipsets, sizes, and orientations. The RGB20 has seen revisions and updates by way of the RGB20S and the RGB20SX. The RGB30 has yet to see any revision, but it houses the same 720×720 screen found in the RGB20S and has identical specs to the RGB20SX with the only deviation being its orientation.
The alleged RGB20 Pro
Today, a new rumor suggests that Powkiddy plans to launch an RGB20 Pro. From what’s known, the available specs are listed below:
- Display: 3.2-inch LCD
- Aspect ratio: 4:3
- Resolution: 1024 * 768
- Extras: Updated shoulder buttons, dual analog sticks, transparent top-layer housing, unknown PCB window
Only time will tell when and if the RGB20 Pro moves past the testing stage, but currently, the alleged specs shown seem promising.
A transparent front-layer housing can be useful to players looking to preserve the overall appearance of their device while providing an easy plastic to wipe and clean; something not found in retro handhelds.
The PCB window shown in the image above is intriguing, mostly because it’s unknown if this is a stylistic choice Powkiddy has made, or if it will utilized for a specific purpose upon launch.
The rumored RGB20 Pro strays away from the 1:1, 720×720 screens found in the RGB20S, RGB20SX, and RGB30, but it exchanges that for a higher resolution, smaller screen. The only other device with the same screen size and resolution is the recently announced MagicX XU HD.
Powkiddy has a reputation for maintaining lower prices by using cheaper parts, but the RGB20 Pro may be another time Powkiddy capitalizes on new ideas.
When the RGB30 had originally launched, no other device had a 1:1, 720 * 720 screen, and it proved to be surprisingly nice for multiple consoles. Later, we eventually saw the same screen in the RGB20S and its iterations, and Anbernic’s RG Cube.
UPDATE: New colors leak
New photos have leaked of the alleged RGB20 Pro, but no other information has been shared. The colors appear to be a lightish gray, light blue, yellow, and a darker grey. However, the first and last colors may be identical or entirely different upon release. As no info has been shared alongside the photos, only time will tell which colors make it to market.
Does the RGB20 Pro seem interesting enough to purchase? Let us know in the comments below, chat with us in our Discord, and stay updated by following our socials.
This page may contain affiliate links, by purchasing something through a link, Retro Handhelds may earn a small commission on the sale at no additional cost to you.
The RGB20S uses a 640×480 4:3 display, not the 1:1 720×720 used in the RGB20SX and RGB30
I am intrigued by these small screen – high definition devices. Not only for the screen but the bump in performance as well. I have just a couple handhelds, and I took my time and did my research before purchasing them. So I’m satisfied with my setup right now. But for some reason I can’t quite put my finger on, I really like the idea of this RGB20 Pro. There is just something appealing about taking a good device that just lacks the performance, and then throwing an octa core into it. Regardless the price, if it will emulate PS2 well, I don’t think I’d be able to resist.
Some real odd choices with this one imho but mixed with some interesting/good choices. the higher res is good for scaling obviously. and its not a lot smaller than the standard 4:3 screen on every other device. the biggest thing I like about this is what appeared to be 3ds style sliders instead of joycon joysticks. I feel more devices with this formfactor would benefit from this style of analog controls on these small devices, especially when it comes to making the devices easier to pocket without worrying about damaging the joysticks and taking up less space on the device as they can be designed to be flush or nearly flush with the rest of the shell. the shape is odd, and I dont know what the point of the little window is at the moment other than to be unique but we will have to see when more info on this unit is released.
I have to be honest. Personally, this has a sleek cool and unique look to it! I had planned to purchase the V10, but I think I’ll hold out for this RGB20 Pro instead. I absolutely like the design of this one.
Is possible using normal linux terminal?
emergency ssh will be nice idea