The boring old candy-bar style handheld of yore still has some life in it, especially when someone fills it with a homemade Linux handheld. Kami4ka’s F1GameStation puts an Allwinner F1C200s, a custom circuit board and a 4.3-inch screen inside a printable shell. The open project appeared on November 20, with working first-revision hardware and an estimated parts cost of about $25 per unit.

That estimate includes a share of the board cost, components, LCD, battery and filament. Building one means ordering the four-layer PCB, finishing the electronics, printing the enclosure and putting together the software. The repository supplies KiCad files, fabrication documents, a component list, Fusion 360 sources and printable models.

f1 source1 1024x479
Image credit kami4ka F1GameStation CC BY SA 40

The F1C200s combines an ARM926EJ-S processor with 64MB of memory. Around it are a 480-by-272 RGB display, microSD storage, a speaker and USB-C charging for a single lithium-ion cell. A D-pad, four face buttons, Start, Select, Menu and shoulder buttons fill out the controls. The PETG enclosure measures 186 by 80mm, with heat-set inserts holding it together.

MiyooCFW 2.0 supplies the software foundation, adapted with a display driver, resized gmenu2x interface and cover-flow launcher. Our Powkiddy V90 MiyooCFW guide explored what that community firmware could do for a budget clamshell. Here, it has an entirely new body to inhabit. A QEMU model also lets developers boot the same card image on a Mac before assembling the hardware.

The creator reports working displays, audio, controls, battery monitoring and USB, with the core hardware tested on two boards. Revision one has some handwork attached: the shoulder and Menu inputs use a firmware workaround for missing pull-ups, and the trigger switches need their locating pegs trimmed. These details are documented alongside the build.

After the much more elaborate Raspberry Pi-based DSpi, this is another inviting open-handheld rabbit hole. F1GameStation keeps the component budget small and leaves the soldering adventure to you.

Source: F1GameStation project

Share.

Jim is a dad from Massachusetts by way of the Northeast Kingdom (IYKYK). He makes music as Our Ghosts, and with his band, Tiger Fire Company No. 1. He also takes terrible photos, writes decent science fiction and plays almost exclusively skateboarding games. He cannot, however, grow a beard. Favorite Game: Tony Hawk’s Pro Skater

Leave A Reply